Marketing news today

An insulator is a device which is used to create an insulation between two conductors. Depending on the type of application for which power transmission is taking place, the insulators can also be used as a means of mechanical support for power carrying cables. In the initial years, the insulators which were used for high voltage applications would often have to be replaced because of wear and tear of the insulators. Today, there are multiple composites of these insulators which can be used thereby extending their life period. The demand for energy is a never ending one. However, over the last ten years, this demand has been increasing at an exponential rate. Numerous countries around the world are trying to ensure that each and every region of the country receives power which leads to the demand for high voltage insulators at these locations. Proper transmission and distribution of power across a country is absolutely essential to ensure that there is no power loss and at the same tim...

One of the key requirements for any storage technology is the ability of the technology to have density storage capabilities whilst allowing for the memory to be recovered or recalled. Power consumption by the technology is also vital as there is a common power source for the storage device as well as for the other components of the overall product. In this respect, there have been a number of storage technologies which have been developed and deployed across different electronic devices depending on the size of the device, the amount of memory that the device is expected to hold and the memory recall requirement. Ferroelectric random access memory (FRAM) stands for random access memory. This memory combines the benefits of DRAM, ROM and flash memory. Faster read and write access is the key benefit FRAM. Higher memory retention is also a key advantage of FRAM over other storage technologies. As the term suggests FRAM uses a ferroelectric layer as against the standard dielectric layer ...

H1N1 Vaccine Market size is forecast to reach $2.3 billion by 2025, growing at a CAGR of 4.51% during the forecast period 2020-2025. H1N1 influenza virus or swine H1N1 virus is a causative agent of infectious disease caused in human beings known as H1N1 or commonly referred to as swine flu. The H1N1 virus mainly affects the respiratory system including the nose, lungs, and throat of the infected person. Increasing incidences of epidemic H1N1 infection and declining immunity among the geriatric population are the major factors driving the growth of the market. Innovation in vaccine manufacturing to obtain universally acceptable vaccine for the H1N1 virus and increased awareness on H1N1 influenza is set to further enhance the overall market demand for H1N1 Vaccine Market during the forecast period 2020-2025. H1N1 Vaccine Market Report Coverage The report: “H1N1 Vaccine Market Forecast (2020-2025)”, by IndustryARC, covers an in-depth analysis of the following segments of the H1N1 Vaccine...

Clean room is the place with very low level of environmental contamination due to pollutants. This environment is needed majorly in manufacturing of medicinal drugs, critical care sections of hospitals and scientific research laboratories. The clean room technology market has been proliferated majorly due to the growing safety concerns for health care products and increasing demand for sterilized pharmaceuticals. Various stringent rules & regulations are being imposed on pharmaceutical industries to avoid contamination of drugs due to human and technological errors. These mandate rules have fueled the demand for clean room in healthcare industry. The customized installation of clean rooms is highly expensive and unaffordable for small and medium organization which is the major inhibiting factor for this clean room market. The report offers in depth analysis of clean room market with respect to standards that define the number and size of particles permitted per volume of air. The ...

A High-Speed Camera is an optical device capable of capturing images at a rate of more than 250 frames per second. High-Speed Cameras are used as a research and media tool that aids in analyzing the processes that are performed at very high speed and cannot be detected by human eye. It captures a consecutive arrangement of pictures that are recorded at high frame rates and later on played in slow motion to allow the viewer to observe and measure events that happen rapidly, impossible for human eye to comprehend. The growth in the market is very much evident from the growth in the number of applications of high speed cameras. High Speed Cameras Market Report provides a detailed analysis on the industry By Spectrum, By Components, By Applications and By Geography. The market is segmented based on spectrum into Visible Light and Infrared. On the basis of Components, market is segmented into Image Sensors, Image Processors, Lens, Memory Devices, Battery, Cooling Systems and Others. The ma...

A spatial light modulator (SLM) are electrically programmable devices that imposes some form of spatially varying modulation on a beam of light by either modulating the intensity or phase, or both the intensity and the phase simultaneously of the light beam. Spatial light modulators are useful in applications where pixel-by-pixel light control is needed for optimum system performance. Amplitude modulation are used in areas such as micro displays, optical correlators, calibrated scene projectors, structured light imaging, programmable spectral engines, and programmable masks. Phase modulation has applications in adaptive imaging (zoom, focus, scan), laser beam steering, microscopy, pulse shaping, optical tweezing, optical communications and wave front control. Globally demand for spatial light modulator is being driven by growing demand for displays in various applications, such as advertisements, gaming, and entertainment devices. This report identifies the global spatial light modulat...

Ammonium acetate is a white crystalline solid derived from the reaction of ammonia and acetic acid. It is a white, hygroscopic solid which is manufactured either by the saturation of glacial acetic acid with dry ammonia gas or by neutralizing acetic acid with ammonium carbonate. It is generally used in chemical analysis, in pharmaceuticals, in preserving foods, and for other uses. Ammonium acetate is volatile at low pressure making it suitable for applications in preparation of samples for mass spectrometry where it is used for replacing cell buffers with non-volatile salts. Apart from this ammonium acetate is used in food additives as an acidity regulator, and in pharmaceuticals in medicines and drug preparation. This report identifies the global ammonium acetate market size in for the year 2014-2016, and forecast of the same for year 2021. It also highlights the potential growth opportunities in the coming years, while also reviewing the market drivers, restraints, growth indicators...